0 Replies Latest reply on Jun 11, 2014 8:24 PM by emmajing

    Five steps to limit Cisco 3560X switch Speed on Port fastly

      Network status you may meet:

      Connect PC1 to Cisco 3560X F0/ 1,the rate of 1M

      Connect PC2 to Cisco 3560X F0/ 2, the rate of 2M

      G0 / 1 of Cisco3560 is for exit

       

       

      From 5 steps to limit Cisco 3560X speed:

      Step 1: Easy Start QOS on the switch

      Switch(config)#mls qos

       

       

      Step 2: Define PC1 and PC2 access control list respectively.

      Switch(config)#access-list 10 permit 10.10.1.0 0.0.0.255 //Control PC1 upward flow

      Switch(config)#access-list 100 permit any 10.10.1.0 0.0.0.255 //Control PC1 downward flow

      Switch(config)#access-list 11 permit 10.10.2.0 0.0.0.255 //Control PC2 upward flow

      Switch(config)#access-list 111 permit any 10.10.2.0 0.0.0.255 //Control PC2 downward flow

       

       

      Step 3: Bind the class with the defined access control lists

       

       

      Step 4: Define the policy and bind the class defined above to the policy

       

       

      Step 5: Use policy to the interface